Fireproof cable trays need to be closed. If the cover plate is not closed, the fireproof effect will not be achieved. Powder-Coated Ladder Cable Tray is suitable for the laying of power cables below 10KV, control cables, lighting wiring, etc. in indoor and outdoor overhead cable trenches and tunnels. Introduction: Powder-Coated Ladder Cable Tray is mainly composed of fireproof boards made of glass fiber reinforced materials and inorganic adhesives combined with metal frames and other fireproof base materials.

The outer layer is coated with fireproof paint. The Powder-Coated Ladder Cable Tray will not burn when exposed to fire, thereby isolating the spread of fire. It has a good fireproof and fire-blocking effect. It is also fire-resistant, oil-resistant, corrosion-resistant, convenient for overall installation, has a reasonable structure, a long service life, and is beautiful. The cables are installed in the cable tray.

The environment is clean and tidy, and it is convenient to clean. Fireproof coatings have the characteristics of thin coating, high fire resistance limit and strong adhesion. Effect and parameters: Powder-Coated Ladder Cable Tray is to spray a layer of fireproof paint on the surface of the ordinary cable tray to achieve the effect of fire prevention and flame retardancy! In fact, the bridge frame itself will not catch fire.

The only thing that could catch fire is the fireproof and flame-retardant principle played by the Cable fireproof paint. The protective thickness of the Powder-Coated Ladder Cable Tray shall be in accordance with the requirements of Table 10 of "Cable Tray for Control and Distribution". Electroplating with a thickness greater than 12μm, hot-dip galvanizing with a thickness greater than 65μm, powder coating with a thickness greater than 50μm, and fireproof with a thickness greater than 500μm can all be measured by a thickness gauge.

Powder-Coated Ladder Cable Tray https://www.cabletraymic.com/powder-coated-ladder-cable-tray.html